Penetrating sealer with stain protection for all natural stone and masonry surfaces. can be applied while surface is still damp
Pen-E-Guard"Maximum" stain resistance properties of any Elite natural looking penetrating sealers. It protects porous surfaces from both water and oil based contaminants such as salt, mould, mildew, tea, coffee, wine and graffiti. It also assists in the easier removal of chewing gum.
Penetrating Sealer will maintain the un-sealed look, whilst protecting the surface from water and staining. Penetrating Sealer is fast curing water based sealer and can be used indoor or outdoors, with no unpleasant odours or flammability problems.
Sizes 5Litre, 10Litre, 20Litre or 200Litre
Features of Penetrating Sealer:
Guards Concrete, Terracotta, Unglazed Tiles, Pavers, Sandstone, Limestone, Bluestone, travertine and other natural rock against water damage and staining.
Enables easier removal of dirt, grease, graffiti and posters from walls.
Eliminates the occurrence of Efflorescence.
Reduces Moss, mould and algae growth.
Reduces corrosion attack on steel reinforcing.
Retains a natural look.
Breathable, allows water vapour to escape.
Salt barrier, ideal around saltwater pools or marinas.
Penetrating Sealer will last up to 10 years or longer dependant on application and weather conditions.
Water based non flammable.
Non film forming will not flake or peel.
Coverage = 7sq.m per Litre Approx
Surface to be treated can be dry or damp but must be cleaned.
Apply Penetrating Sealer liberally, by spray, flood coat spreading with bristle broom, sponge or roller.
Give whole surface a “wet” look.
Leave for 5-20 minutes then reapply a second coat whilst still wet.
Allow to dry, water repellency will be evident immediately the surface appears